Machine/Conveyor Operators
Elite On Premise
Little Rock, AR
Full-time
Manufacturing / Production / Operations
Posted on February 25, 2019
Welspun Temps Needed for Machine/Conveyor Operators with Grinding.
- Ability to perform continuous physical labor work.
- Some jobs require manual rolling of pipes weighing 6 to 8 tons for up to 12-hour shifts straight.
- Must meet all physical labor requirements.
Job Summary:
Operator has to ensure continuous flow of pipes after Third Party Inspector (TPI) clearance at final table, roping as per process sheet and pushing pipes at the outbound skid.
Essential Duties and Responsibilities: Reporting relationships, work assignments, and work schedules may be subject to change in order to meet company needs and business requirements.
* General Responsibilities:
o Ensure to wear PPE's as mentioned in JSA and required to perform the job.
o Never cross a conveyor roller line. Never stay between pipes in movement.
o Ensure to use the designated walkways while performing the job.
o Ensure no man movement in the travel of the pipe movement at any time.
o Must be able to maintain good housekeeping standards around the working area.
o Ensure safety of surrounding area before moving any pipe.
o Communicate with relevant stations to maintain productivity.
* Blast Plug Insert and Transfer
o Carry out blasting plug insert operation safely and efficiently as per work instructions and
job safety analysis.
o Perform the job in timely fashion to support production and ensure blasting operation is not
affected due to non-availability of incoming pipes without blasting plugs.
o Report to shift supervisor for any wear and tear of the blasting foams and screens.
o Ensure sufficient stock of blasting foams and screen available for use.
o Ensure proper cutting of foams to required size and shape with minimum wastage.
o Stay out of the area where pipes are being received at the inbound rack.
• Coating Line Inlet add Catchup
o Carry out pipe transfer operation safely and efficiently as per work instuctions and job
safety analysis.
o Ensure working of all the interlocks for the material handling equipment before performing
the pipe transfer operation.
o Perform the job in timely fashion to support production and ensure coating line is not getting
stopped due to non-availability or gap between the pipes.
o Carry out catch up operation int timely and safely manner and ensure no gap between the pipes coating inbound conveyor.
o Report to shift supervisor for any wear and tear of coating inbound conveyor rollers, any breakdown or malfunction in material handling equipment.
•Outbound Line/Repair
o Carry out pipe transfer operation, Holiday Inspection, grinding and coating repair operations safely and efficiently as per work instructions and Job safety analysis
o Ensure working of all the interlocks for the material handling equipment, disable conveyor rollers and rotation rollers before performing the pipe transfer and rotation operation.
o Perform the job in timely fashion to support production and ensure coating line is not getting stop.
o Ensure the set voltage of the Jeeper is meeting the requirements as per process data sheets all the time.
o Ensure to cover 100% coated area with conductive rubber while performing Holiday/Jeeping operating
o Ensure and maintain the half-moon conductive rubber and brass brush in good condition, inform lead person or supervisor immediately on wear and tear of the same.
o Mark the coating discontinuity of coating and repair as per process sheet and repair procedure.
o Ensure bevel and root face are free of expoxy coating before pipe goes towards outbound skid.
o Ensure cut back area is free of expoxy coating before pipe goes towards outbound skid.
o Ensure to mark center line on coated pipe
o Ensure safety of surrounding area before rolling the pipes with "F" bar on Final table.
•Housekeeping
o Clean walk ways, clean floor in blasting, grinding, coating, and final bench areas.
o Handrail cleaning as per frequency decided by shift supervisor.
o Ensure housekeeping of the plant and seek help if required from department shift supervisor to remove scrap/waste
o Replace bags of wast bins on regular basis.
o Collect epoxy residue after stripping operation in a bag on regular intervals or as required.
o Follow safe work practices.
o Inform shift supervisor immediately if required additional equipment's to clean, collect the waste.
o Other duties as assigned,
* Rope Cutting/Application/Pipe Pushing
o Carry out cutting of ropes, roping on pipes and pushing of pipes safely and efficiently as per
work instruction, Job Safety Analysis (JSA) and process sheet.
o Ensure working of all the interlocks for the conveyor, safety switches and pipe moving
equipments before performing roping and pipe pushing operation.
o Perform the job in timely fashion to support production and ensure final bench is not getting
hold up.
o Report to shiff supervisor for any wear and tear of diabolo conveyor rubber lining, metal
backed up rubber pads of the outbound slcids and any breakdown or malfunction in material
handling equipment.
o Ensure sufficient stock of cut ropes of required size and length available for the roping
application all the time.
o Ensure putting ropes and spreading uniformly across the length of the pipe coming out of coating plant on outbound conveyor.
Required Competencies:
* Able to read and interpret general instruction, written information & safety rules etc.
* Safety and Security - Uses equipment and materials propezly. Follow safe work practices.
* Attendance/Punctuality - Is cor>sistently at work and on time.
* Dependability - Follows instructions, responds to management direction
* Professionalism - Treats others with respect and consideration regardless of their status or
position.
Required Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Ability to perform continuous physical labor work. Some jobs require manual rolling of pipes weighing 6 to 8 tons for up to 12-hour shifts straight. Must meet all physical labor requirements.
Benefits available after probationary period met. Must meet all verify cation requirements of client & be available for 12-hour rotating shifts, + days, nights, weekends, & weekdays.
Benefits available after probationary period met. Must meet all verify cation requirements of client & be available for 12-hour rotating shifts, + days, nights, weekends, & weekdays.
Education and/or Experience:
High School Graduate
Suitable combination of Education and Experience may be use for outstanding candidate with
demonstrated excellence on the job.
3 to 6 months experience in a mechanical industry.
Ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Ability to effectively report information.
Benefits available after probationary period met.
Must meet all verification requirements of client & be available for 12-hour rotating shifts, + days, nights, weekends, & weekdays.
Located on Welspun Tubular Facility in Elite Office!